CustomGimbals
rue Raoul Briquet
62217 Achicourt
France
We ship worldwide

2 Axis Micasense RedEdge RE3 Micro NDVI Brushless Camera Stabilizer for DJI Inspire 1

Lightweight Camera Stabilizer for Micasense RedEdge RE3 camera and DJI Inspire 1 - Video Stabilized Controllable Camera Stabilizer

SKU: SEE3OILRIE1822
Delivery date: Manufactured Per Order Request, Dispatched in 2 weeks
Manufacturer: Copterlab
*
*
*
550.69 €
excluding shipping

Copterlab Camera Stabilizers 30DAYS Money back GuaranteedCopterlab Camera Stabilizers Lifetime Guaranteed
2 Axis Micasense RedEdge 3 Camera Stabilizer
for DJI Inspire 1

Material: Carbon ABS Camera Stabilizer fits perfectly with Micasense RedEdge 3 camera for multispectral imaging.
This Camera Stabilizer avoid motor vibrations coming from the frame.

Screws, 4 damper balls Included.
Controller card used: SimpleBGC

You can control Roll/Pitch/Yaw from your remote controller

Weight: 210g (Camera Stabilizer + motors + vibration isolation dampers + mount adapter)

3 differents packages:

- Camera Stabilizer parts alone
- Camera Stabilizer mounted with 2 brushless motors
- Camera Stabilizer mounted with 2 brushless motors + Gyro controlled card + ready to use

We advise you to buy a ready to use configuration

 

User Instruction manual


Why choose Copterlab gimbal?

 

  Copterlab gimbal Other gimbals
Support Live support (website - Skype - email) No any support at all
Content Ready to use Need to mount and setup it
Material Carbon ABS Poor 3d printed parts or aluminum parts
Weight 210g  Unknown
Camera adapter Lot of and we can create yours for free No
Jello No jello garanteed You need to spend lot of time to avoid it
Colors Gold, Silver, White Gloss, Black Gloss -
Country made France China for sure
Costs Not cheap, lot of time to create it You get that you paid
Warranty Lifetime: all 3D parts can be replaced freely, only shipping costs are paid by customer Nothing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Link to the Alexmos SimpleBGC user manual

 Link to the Storm32 user manual

DJI Inspire 1 capture the unforgettable.

All of the core technologies of the DJI Inspire 1 have been engineered into the Zenmuse X3 gimbal. This keeps the 4K camera steady in the sky and ensuring stable, professional footage every time. The 3-axis gimbal constantly draws on data fed by the intelligent flight controller so it knows the aircraft’s flight parameters.  Angular velocity, momentum, inertial force and even GPS data allows the gimbal to apply countering power and force keeping the camera perfectly level.

The DJI Inspire 1 Camera shoots 4K video at up to 30p and HD video frame rates up to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis

Carbon fibre arms give lightweight strength to manoeuvre in the air and move out of the camera’s way at the flick of a switch. With a full 360⁰ unobstructed view, the Inspire1 is able to capture shots independent of the flight direction.

The all new 13 inch quick release carbon fibre rotors are built with the unique DJI “Z-Blade” design.

DJI Inspire 1 V2

Brushless motors pioneered by DJI are now the standard in the multirotor quadcopter industry. In addition, the Inspire 1 takes the next step in brushless development by integrating curved magnets that fit flush around the edge of each motor. Although much more difficult to produce, these magnets eliminate airflow gaps within the motor, greatly increasing efficiency.

A fully integrated intelligent battery powers the Inspire 1 and virtually manages itself. The remaining battery power is visible during flight. The system will calculate the time the aircraft needs to return home and will let indicate when it’s time to fly back. The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps keep the Inspire 1 in the air and flying for years to come.

The main controller is the brain of the entire system and receives thousands of bits of data every second. Function of the main controller is to translate that data into action during flight. The main controller tells every part of the Inspire 1 what to do. It also calculates environmental conditions in real-time. Ensuring the aircraft responds to commands instantly.

You Didn't Find Your Gimbal?

That means we didn't work enough. Start a conversation with our technicians by chat or by contact page, they will be happy to answer you asap with the most suitable solution for your needs.


Why ordering gimbals here?

Here you won't find some chinese rebranded gimbals.

We manufacture the whole gimbal parts that means

- Motors

- Gimbal controller

- Camera mount

- Frame mount

 

What if i crash my Copterlab gimbal?

 

Each part can be replaced easily by cheap offer as we manufacture each part of the gimbals we sell

 

What if i'm running under issue with my Copterlab gimbal?

 

Our support will reply you quickly by email or live chat support. After purchasing, you stay our priority.

 
 

What if i can't find model i'm searching for?

 

Just contact us and we will design custom parts for free!)

 

I just want to get the electronic and motors gimbal parts

Just click here

 
Designed in NevadaMade in France
We stand for USA