CustomGimbals
rue Raoul Briquet
62217 Achicourt
France
We ship worldwide

Hiphen Airphen NDVI monteringsbeslag til DJI Mavic Pro

Letvægts monteringsbeslag kamerastabilisator til Hiphen Airphen multispektral sensor og DJI Mavic Pro - manuel styrbar pitch-vinkel og vibrationsfri monteringsbeslag

SKU: NINTTRIC1812
Leveringsdato: Manufactured Per Order Request, Dispatched in 2 weeks
Fabrikant: Copterlab
*
*
*
*
*
*
395,01 €

Copterlab Camera Stabilizers 30DAYS Money back GuaranteedCopterlab Camera Stabilizers Lifetime Guaranteed
Hiphen Airphen Multispectral Sensor 
Mounting Bracket for DJI Mavic Pro

Material: Carbon ABS Camera Stabilizer fits perfectly with Hiphen Airphen Multispectral Sensor and optional Flir Tau 2 for multispectral imaging.
This Mounting Bracket avoid motor vibrations coming from the frame.

The Airphen datasheet (in pdf) is available here

Screws, 4 damper balls, +5v Ubec, Extended landing gear Included.

Weight: 100g (Camera Stabilizer + vibration isolation dampers + mount adapter)
Flight time: 10 minutes with Hiphen Airphen + Flir Tau 2 on board


Power is taken from Mavic stock battery without avoiding DJI warranty (optional)

Multispectral sensors comparison matrix
Validated by Micasense for RedEdge/Sequoia sensor and Hiphen for Airphen

 

Parrot Sequoia

Micasense Rededge-M

Hiphen Airphen

Number of bands

4

5

6

Shutter mechanisms

Rolling

Global

Global
Possibility of radiometric synchronization with Flir Tau2 thermal camera

Top of Frame Pulse

Nope

Sync pulse to externally triggered cameras and RTK timing pulse

Sync pulse to externally triggered cameras and RTK timing pulse

Input trigger

USB, Wi-Fi

Gig-Ethernet interface, Serial, or PWM

Gig-Ethernet interface, Serial, or PWM

Capture rate

1 fps

1 fps

1 fps

Sensor Resolution

1280 x 960 pixels

1280 x 960 pixels

1280 x 960 pixels

Storage

Internal + SD card high speed

Internal + SD card high speed

SD card high speed (32Go, 64Go,...)

Data format

10 bit (1024 values)

Uncompressed and geotagged TIFF, 12 bits per pixel (4096 values) saved on 16 bits

Uncompressed and geotagged TIFF, 12 bits per pixel (4096 values) saved on 16 bits

Ground Sample Distance (GSD) -100m

11 cm/pixel

6,8 cm/pixel

8mm - 4,7 cm/pixel

4.2mm - 8,9 cm/pixel

With double swath feature

External Light Sensor

Yes

Yes

Done by software correction

FOV

Single

Single

5.5mm -

Single or Double

8mm - 33°x26° / 4.2mm - 60°x46°

Weight

135g

173g

207g

Power Input

4.5V - 6V

5V - 15.8V

7V - 30V

Power consumption

10 w/h

6 w/h

7w/h

GPS

External

External

Internal or External

Customizable wavebands

No

No

(450, 530, 560, 570,620,675, 710, 730, 750, 850) and others

FWHM

-           

20mm for blue & green

10mm for red & rededge

40mm for NIR

10mm for all bands or customized

Price

$3,500 USD

$4,900 USD

10,900 EUR


Why choose Copterlab gimbal?

 

  Copterlab gimbal Other gimbals
Support Live support (website - Skype - email) No any support at all
Content Ready to use Need to mount and setup it
Material Carbon ABS Poor 3d printed parts or aluminum parts
Weight 100g  Unknown
Camera adapter Lot of and we can create yours for free No
Jello No jello garanteed You need to spend lot of time to avoid it
Colors Gold, Silver, White Gloss, Black Gloss -
Country made France China for sure
Costs Not cheap, lot of time to create it You get that you paid
Warranty Lifetime: all 3D parts can be replaced freely, only shipping costs are paid by customer Nothing

 

 

DJI Mavic Pro

The DJI Mavic Pro is a small yet powerful drone that turns the sky into your creative canvas easily and without worry, helping you make every moment an aerial moment. Its compact size hides a high degree of complexity that makes it one of DJI’s most sophisticated flying cameras ever. 24 high-performance computing cores, an all-new transmission system with a 4.3mi (7km) range, 5 vision sensors, and a 4K camera stabilized by a 3-axis mechanical gimbal, are at your command with just a push of your thumb or a tap of your finger.

Fly further

Inside the Mavic’s pocket-sized remote controller is DJI’s brand new OcuSync transmission technology, with a range of 4.3mi (7km) and Full HD 1080p video streaming.

No bumps and scrapes

An unprotected drone could hit obstacles during long distance flight or when descending from an inadequate height in Return to Home mode. The Mavic uses Flight Autonomy technology to sense obstacles up to 49ft (15m) away. It can then bypass these obstacles or brake to hover, preventing accidents even when flying beyond visual range.

Precision Hover

Satellite positioning can only help a drone hover in an unobstructed outdoor area free of interference. Without satellites, the drone will not be able to position and become susceptible to drifting. However, with forward and downward vision sensors, the Mavic can hover precisely indoors or in places without GPS.

Stay flying longer

The Mavic is only 1/6th the size of the Phantom 4 but this reduction in size doesn’t mean a reduction in flight time. The Mavic actually flies much longer than you would expect from its compact size. It is capable of reaching an absolute max flight time of 27 minutes. Also a maximum distance of 13km due to its powerful, high efficiency motors.

You Didn't Find Your Gimbal?

That means we didn't work enough. Start a conversation with our technicians by chat or by contact page, they will be happy to answer you asap with the most suitable solution for your needs.


Why ordering gimbals here?

Here you won't find some chinese rebranded gimbals.

We manufacture the whole gimbal parts that means

- Motors

- Gimbal controller

- Camera mount

- Frame mount

 

What if i crash my Copterlab gimbal?

 

Each part can be replaced easily by cheap offer as we manufacture each part of the gimbals we sell

 

What if i'm running under issue with my Copterlab gimbal?

 

Our support will reply you quickly by email or live chat support. After purchasing, you stay our priority.

 
 

What if i can't find model i'm searching for?

 

Just contact us and we will design custom parts for free!)

 

I just want to get the electronic and motors gimbal parts

Just click here

 
Designed in NevadaMade in France
We stand for USA